Bignozzi, Presse idrauliche

HYDRAULIC PRESSES

Hydraulic Presses Catalogue (1,71MB)

Double Ram Track Press - BPC 210

Double Ram Track Press	BPC 210
Max thrust of each ram	t	210
Max working pressure	bar	550
Stroke	mm	190
Speed:
Approach	mm/min	2200
Pressing	mm/min	450
Return	mm/min	8300
Electric motor	kW	11
Press lenght	m	1.48
Press height	m	1.70
Press width	m	2.50
Conveyor lenght	m	10
Mass	kg	4700

Optional equipment for track press: movable hydraulic wrench, track winder, oil injection equipment on lubricated tracks, lifting pads device.

Hydraulic wrench - W7

New Hydraulic Wrench to remove or assemble a complete string of crawler track grouser in a very short time. The wrench control is actuated by turning the hand grip to operate the directional valve wich is spring centered, so that it will always return to off position when the grip is released. Instantaneous control of wrench: forward, reverse or stop. Accurate control of torque. Manual variable speed. Hydrostatic transmission with axial piston pump.

Hydraulic Wrench	W7
Max torque	da N.m	980
Max variable speed	r.p.m.	190
Electic motor	kW	7.5
Voltage and cycles upon request
Socket drive shaft	mm	25.4-38.1
Mass	kg	880

Track winder - AV2

The Track Winder model AV is designed for crawler tracks winding with or without grouser shoes.

Track Winder	AV2
Reversible rotation speed	r.p.m.	3
Spindle rotation speed	mm	1420
Mass	kg	940
Voltage and cycles at request
Electric motor	kW	3
Optional Equipment
3 Winding drums	mm	Ø 442X330
	mm	Ø 355X290
	mm	Ø 245X220
2 Pins for winding drums
1 Collar for winded chain extraction

Roller idler press - RIP 100

Roller Idler Press	RIP 100
Max capacity of ram	t	100
Max working pressure	bar	500
Stroke	mm	700
Speed:
Approach	mm/min	1840
Pressing (100 bar)	mm/min	1700
Pressing (500 bar)	mm/min	302
Return	mm/min	2800
Electric Motor	kW	7.5
Dimensions	m	2.87x1.96x1.60
Mass	kg	1900

Vertical hydraulic presses

Specifications		BP 63V	BP 100V	BP 100B	BP 160V	BP 160B	BP 250V
Max ram capacity	Mn (t)	0,063 (63)	0,1 (100)	0,1 (100)	0,16 (160)	0,16 (160)	0,25 (250)
Ram travel	mm	320	400	400	500	500	630
Max working pressure	bar	520	500	500	500	500	500
Installed power with manual drive	kW	1,5	3	3	5,5	5,5	7,5
Installed power with electric drive	kW	2,2	4	4	7,5	7,5	11
Approach speed	mm/sec	25	41	41	31	31	25
Pressing speed	mm/sec	2	2,8	2,8	3,6	3,6	3,6
Return speed	mm/sec	68	106	106	83	83	65

Specifications		BP 63 V	BP 100 V	BP 100 B	BP 160 V	BP 160 B	BP 250 V
A		300	400	600	500	700	600
B		1020	1220	2100	1520	2100	1820
C	min	502	797	797	797	897	897
C	max	1254	1358	1357	1357	1457	1457
D	Fixed cylinder	1042	938	1008	969	1208	1134
	Movable cylinder	1016	897	967	929	1168	-----
	Stampholder	984	859	929	871	1110	1006
H		460	600	820	720	960	860
I		1000	1200	2080	1500	2080	1800
E		2280	2620	3100	2800	3600	3300
F		960	1300	1520	1470	1700	1650
G		1800	2200	3200	2600	3300	3000
Mass	kg	1050	2300	4300	3800	6200	6600

Hydraulic Presses Catalogue (1,71MB)