body

Hydraulic Motors Catalogue (1,16MB)

RADIAL PISTON HYDRAULIC MOTORS: BIGNOZZI high torque low speed hydraulic motors works with seven radial pistons. That resuslts is an exceptionally uniform torque, constant speed even at low r.p.m. and silent running. High starting torque. Maximum torque available in both directions. Very low inertia. High mechanical and volumetric efficies. All components are designed for a high service life. In addition to normal mineral oils non-inflammable phosphate ester based fluids and water glycol may be used. Gear wheels, pinions and any other means of trasmitting power can be direct-coupled to the drive shaft, without the need for any additional bearings. External shaft loads are admissible, owing to the strong construction. Our hydraulic motors may be used in closed or open circuit and driven by piston pumps or vane pumps. On request, the motors can be supplied coupled with the negative pressure hydraulic brakes.

MOTORE TIPO	Displacement per revolution	Theorical specific Torque	Countinuous Pressure	Peak Pressure	Max Speed	Max theoric continuous Power	Mass
MOTORE TIPO	cm3	daNm	bar	bar	N min	kw	kg
BM 65	65	0,10	210	350	800	18,2	37
BM 100	108	0,17	210	350	700	26,5	37
BM 150	155	0,24	210	350	650	35,2	37
BM 200	202	0,32	210	350	560	39,6	52
BM 250	255	0,40	210	350	520	46,4	52
BM 300	298	0,47	210	350	480	50,1	52
BM 400	401	0,63	210	350	420	58,9	84
BM 450	449	0,71	210	350	390	61,3	84
BM 500	497	0,79	210	350	360	62,6	84
BM 600	609	0,97	210	350	320	68,2	84
BM 700	702	1,11	210	350	300	73,7	91
ES 800 sl	814	1,29	210	350	280	79,8	142
ES 1050	1.053	1,67	210	350	260	95,8	142
BM 1200	1.212	1,93	210	350	240	101,8	188
BM 1300	1.293	2,06	210	350	230	104,1	188
BM 1400	1.400	2,23	210	350	220	107,8	188
BM 1600	1.605	2,55	210	350	200	112,3	244
BM 1900	1.939	3,09	210	350	170	115,1	244
BM 2400	2.357	3,75	210	350	150	123,7	244
BM 2800	2.805	4,46	210	350	180	176,6	406
BM 3400	3.414	5,44	210	350	150	179,2	406

Dimensional Table :

Type	A	B	C	D	E	F	G	H	I	J	K	L	M	N	O	P	Q	R	S	T	U	V	W	X	Y	Z	a	b	c	d	e	f	g
BM 65	283	59	172	190	212	290	224	158	118	49	15	70	156	122	62	26,2	52,4	24	M-10-(18)	43	25	25	UNI-221-26/32	80	16	GJ 1/4	11	M.10	66	55	30	29	DIN 5482-40x36
BM 100	283	59	172	190	212	290	224	158	118	49	15	70	156	122	62	26,2	52,4	24	M 10 (18)	43	25	25	UNI 221-26/32	80	16	GJ 1/4	11	M 10	66	55	30	29	DIN 5482-40x36
BM 150	283	59	172	190	212	290	224	158	118	49	15	70	156	122	62	26,2	52,4	24	M 10 (18)	43	25	25	UNI 221-26/32	80	16	GJ 1/4	11	M 10	66	55	30	29	DIN 5482-40x36
BM 200	324	74	190	210	234	335	250	184	144	58	16	70	156	122	62	26,2	52,4	24	M 10 (18)	57	40	25	UNI 221-32/38	80	20	GJ 3/8	11	M 10	78	60	30	29	DIN 5482-40x36
BM 250	324	74	190	210	234	335	250	184	144	58	16	70	156	122	62	26,2	52,4	24	M 10 (18)	57	40	25	UNI 221-32/38	80	20	GJ 3/8	11	M 10	78	60	30	29	DIN 5482-40x36
BM 300	324	74	190	210	234	335	250	184	144	58	16	70	156	122	62	26,2	52,4	24	M 10 (18)	57	40	25	UNI 221-32/38	80	20	GJ 3/8	11	M 10	78	60	30	29	DIN 5482-40x36
BM 400	358	87	230	254	280	420	271	205	165	63	19	70	156	122	62	26,2	52,4	24	M 10 (18)	62	44	32	UNI 221-36/42	80	25	GJ 3/8	11	M 10	104	80	32	29	DIN 5482-40x36
BM 450	358	87	230	254	280	420	271	205	165	63	19	70	156	122	62	26,2	52,4	24	M 10 (18)	62	44	32	UNI 221-36/42	80	25	GJ 3/8	11	M 10	104	80	32	29	DIN 5482-40x36
BM 500	358	87	230	254	280	420	271	205	165	63	19	70	156	122	62	26,2	52,4	24	M 10 (18)	62	44	32	UNI 221-36/42	80	25	GJ 3/8	11	M 10	104	80	32	29	DIN 5482-40x36
BM 600	358	87	230	254	280	420	271	205	165	63	19	70	156	122	62	26,2	52,4	24	M 10 (18)	62	44	32	UNI 221-36/42	80	25	GJ 3/8	11	M 10	104	80	32	29	DIN 5482-40x36
BM 700	395	101	220	290	320	430	294	228	188	75	15	70	156	122	62	26,2	52,4	24	M 10 (18)	78	63	36	UNI 221-52/60	80	45	GJ 3/8	11	M 10	104	-	-	-	-

Dimensional Table :

Type	A	B	C	D	E	F	G	H	I	J	K	L	M	N	O	P	Q	R	S	T	U	V	W	X	Y	Z	a	b	c
BM 800	467	125	256	300	330	485	342	303	193	78	14	60	190	172	86	57,2	27,8	25	M.12.(20)	90	65	40	UNI 221-46/54	104	45	GJ.3/8	15	M.20	118
BM 1050	467	125	256	300	330	485	342	303	193	78	14	60	190	172	86	57,2	27,8	25	M 12 (20)	90	65	40	UNI 221-46/54	104	45	GJ 3/8	15	M 20	118
BM 1200	504	142	315	395	428	565	362	323	213	70	34	60	190	172	86	57,2	27,8	25	M 12 (20)	92	70	40	UNI 221-62/72	104	29	GJ 1/2	13	M 16	118
BM 1300	504	142	315	395	428	565	362	323	213	70	34	60	190	172	86	57,2	27,8	25	M 12 (20)	92	70	40	UNI 221-62/72	104	29	GJ 1/2	13	M 16	118
BM 1400	504	142	315	395	428	565	362	323	213	70	34	60	190	172	86	57,2	27,8	25	M 12 (20)	92	70	40	UNI 221-62/72	104	29	GJ 1/2	13	M 16	118
BM 1600	548	169	350	420	470	610	379	340	230	76	30	60	190	172	86	57,2	27,8	25	M 12 (20)	110	80	40	UNI 221-72/82	104	28	GJ 1/2	22	M 16	136
BM 1900	548	169	350	420	470	610	379	340	230	76	30	60	190	172	86	57,2	27,8	25	M 12 (20)	110	80	40	UNI 221-72/82	104	28	GJ 1/2	22	M 16	136
BM 2400	548	169	350	420	470	610	379	340	230	76	30	60	190	172	86	57,2	27,8	25	M 12 (20)	110	80	40	UNI 221-72/82	104	28	GJ 1/2	22	M 16	136
BM 2800	648	185	470	535	585	735	463	416	248	86	35	90	214	200	90	168	60	36	M 16 (25)	130	100	50	UNI 221-92/102	114	36	GJ 3/4	22	M 20	146
BM 3400	648	185	470	535	585	735	463	416	248	86	35	90	214	200	90	168	60	36	M 16 (25)	130	100	50	UNI 221-92/102	114	36	GJ 3/4	22	M 20	146

SERIES MT RADIAL PISTON HYDRAULIC MOTORS
WITH ROTATING HOUSING

Modello		MT 600	MT 2400
Displacement per Rev.	cm³	600	2400
Max Reversible Speed	n/min	180	100
Specific Torque	daN m	0.96	3.82
Working Pressure	bar	150	150
Intermittent Pressure	bar	200	200
Peak Pressure	bar	250	250
Max Continuous Power	kw	26	60
Weight	kg	90	348
Viscosity Oil		cst 15-80
Max Working Temperature		70°C

HYDRAULIC GEARED-MOTORS BMR SERIES

	Displacement per revolution	Continuous power	Peak pressure	Max input rotation speed	Reduction ratio	Max radial load	Mass
	cm	bar	bar	n/min	1:....	daN	kg
BMR.100.M	108	210	350	700	3,5 -4,12 5,17 - 6 - 7,25	2500	68
BMR 150 M	155	210	350	650	3,5 -4,12 5,17 - 6 - 7,25	2500	68
BMR 200 M	202	210	350	560	3,5 - 4,33 5 - 6	3200	109
BMR 300 M	298	210	350	480	3,5 - 4,33 5 - 6	3200	109
BMR 400 M	401	210	350	420	4,08 - 5,05 5,81 - 6,92	5000	173
BMR 600 M	609	210	350	320	4,08 - 5,05 5,81 - 6,92	5000	173

Dimensional Table :

	A	B	C	D	E	F	G	H	I	L	M	N	O	P	Q	R	S	T	U	V	Z	ØK	J	ØX	ØY	a	b	c	d	e
BMR 100 M BMR 150 M	491	103	291	97	64,5	52,4	24	10M	150	62	26,2	17	6	80	70	13	50	7	11	18	10M	36	W60x3x8f	170	220	245	290	G1/4	62	52
BMR 200 M BMR 300 M	562	103	349	110	64,5	52,4	24	10M	150	62	26,2	20	6	80	81	13	60	8	13	22	12M	40	W70x3x8f	190	260	290	333	G1/4	72	62
BMR 400 M BMR 600 M	627	103	396	128	64,5	52,4	24	10M	150	62	26,2	25	12	80	91	13	70	8	17	23	16M	52	W90x5x8f	230	320	355	410	G1/4	92	77

Hydraulic Motors Catalogue (1,16MB)